Bluvolt 2.4KVa Trolley Inverter 1800W – MS2418 Lithium-Ion

• Simulated sine wave inverter
• Wide input voltage range
• 10 A and 20 A standard AC charging current
• LCD display for comprehensive information
• Overload, short circuit and reverse polarity protection

• Humidity: 0 to 90% Relative Humidity (Non-condensing)
• Operating Temperature: 0°C to 40°C
• Storage Temperature: -15°C to 50°C

• Capacity: 2400VA/ 1800W
• Input Voltage: 230 VAC
• Input Acceptable Voltage Range: 90-280 VAC
• Input Frequency: 50 Hz/60 Hz (Auto sensing)
• Output AC Voltage Regulation (Batt. Mode): ± 10%
• Output Efficiency (Peak): 85%
• Transfer Time: 20 ms typical
• Output Waveform (Batt. Mode): Simulated sine wave
• Battery Type and Numbers: 12 V 100Ah Lithium-Ion x 2 Included
• Full Protection: Overload, short circuit and reverse polarity protection
• Dimensions: 510mm × 480mm × 460mm
• Weight: 67.5kg

What should I not plug into my inverter?

• Avoid High Wattage items such as hair dryers, heaters, vacuum cleaners, kettles etc.
• The unit has an overload protection built-in which is a loud alarm beeping noise, please unplug anything causing the overload straight away as you can damage the unit. Powering the unit off and then back on, will reset the unit.

How do I maximise my inverter’s battery life?

• Please leave your inverter kit plugged in and turned on. This will keep your batteries at constant full charge – this is the best state to keep them in and protect your equipment that you have plugged into the inverter.
• If there is no load shedding for a few weeks, the acid will start to sulphate on the top of the battery, so please do the following: Once every 2 months, please unplug the inverter from the wall and let it run until the inverter starts beeping, then immediately plug it back in. This will circulate the acid and will tremendously increase the cycle life of your batteries.
• If you want to plug in any lamps into the inverter make use of low wattage LED globes (approx. 5 to 7 Watts) to maximise the uptime of the inverter.
• WARRANTY INFORMATION:  Batteries in this unit are rated to last approx. 250 cycles. During occasional load shedding, at stage 1-3, the average life span is 2 years. Unfortunately, during constant load shedding, at stage 4-6, these cycles will be depleted within a few months.  The batteries will also be further degraded due to insufficient time to recharge fully in between load shedding cycles. As soon as the battery stops lasting, this means the battery has depleted its cycles and reached the end of its life. Unfortunately once this occurs the warranty becomes void.
• Therefore, during stage 4-6, if using in conjunction with an inverter, we highly recommend turning off the power switch on the inverter switch itself, when the need for power is not crucial. This will preserve the longevity of the battery (please keep the inverter plugged into the wall to keep the batteries charged).